With flight case
New improvements of our firing system
We have added the wire control model. In order to avoid the signal interference when there are many
radio products on the stage. Pls check picture below:
We have added a small removeable lamp on the transmitter. It is more convenient for display.
The whole set firing system is including one 24 cues transmitter , four 24 channels receivers.
5pcs chargers, 4 pcs keys and 5 pcs antennas.
Operate video in youtube: http://www.youtube.com/watch?v=G6R4Rxn2A6c
Parameters of transmitter
1. Powered by 4.2V internal rechargeable lithium battery (but the output voltage is 12V), less weight and longer life.
2. with battery low indicator. Charging on AC for 8 hours.
3. with 24 memory indicator . The LED will turns RED when you press the buttons beside.
4. with antenna, more stable.
5. The remote distance is 500M.
6. with 24 buttons and 24 LED. When the cue is fired, the LED will turns RED.
7. with “Sequential” button, it is divided into parts, “1-12” and “13-24”
8. Waterproof case
9. It could divide into 100 districts (control 100 pcs 24 channels receivers at max). Please notice the “district” button on the top right corner. When you adjust it to “1”, it will control the first 24 channels of first receiver (district). When you adjust it to “2”, it will run the second receiver (district).
Parameters of receiver
1. Powered by 4.2 internal rechargeable lithium battery(but the output voltage is 12V), less weight and longer life.
2. Each receiver has 24 channels.
3. with “TEST” function. The LED will turns Green when the products are connecting well.
4. Each channel could fire one talon(consumer) igniters and 5 e-matches in series.
5. Programmable and interchangeable. You could use change the channels as you want. And if one receiver has some problem, you could use others instead.
6. It could divide into 100 districts (control 100 pcs 24 channels receivers at max). Please notice the “district” button on the top right corner. When you adjust it to “1”, it will control the first 24 channels of receivers. When you adjust it to “2”, it will run the second 24 channels. You could use the transmitter to control the other districts by the same manner.
7. Sequential fire. Please adjust the “district” button to the one that you want to do the sequential fire. And then move the “1-12” and “13-24” buttons. Pressing “sequential” button , all the channels will do the sequential fire with 0.4 Seconds. If you need different sequential time, please tell us. We can set it in the factory.
8.Salvo fire. Please adjust the sequential time as "0.0", then press the "rapid" button, it will fire 24 channels at the same time.
How to do Sequential fire
1.If you want to make one receiver do sequential fire, please turn on the two buttons , which are the “1-12”and”12-24”. And then please press the “rapid” button. And then all the channels will fire sequentially.
2.When you want several receivers sequential fire together. Please adjust to the same “district” number. And you can do sequential fire.
3.When you want several receivers do the sequential fire one by one. You could adjust transmitter “District” to “0” and then adjust the receivers “District” to “1,2,3,4…”Now when the first receiver done sequential fire, the second will start, and then the receivers will fire one by one.
Instruction of the charger
1. You’d better cut off the power of machine when charging on AC.
2. There are two LED on the charge( red LED and green LED), both will light when charging.
3. The green LED will burn out when the electricity is full . Only the red one is light.
4. the charging time is about 8 hours. And the firing system will keep working for 5-10 hours .
Phone: +86 15116168813
Tel: +86 73183668781
Add: No. 148, Mid-Lao Dong Road, Liuyang, Hunan, China