New improvements of our firing system

1. We have added the wire control model. In order to avoid the signal interference when there are many

   radio products on the stage. Pls check picture below:

   
   

   
   

2. We have added a small removeable lamp on the transmitter. It is more convenient for display.

   

   
   

The whole set firing system is including one 24 cues transmitter ,10 pcs 24 channels receivers.

11pcs chargers, 10 pcs keys and 11 pcs anternnas.

Operate video in youtube: http://www.youtube.com/watch?v=G6R4Rxn2A6c

Parameters of transmitter

1. Powered by 4.2V internal rechargeable lithium battery (but the output voltage is 12V), less weight and longer life.

2. with battery low indicator. Charging on AC for 8 hours.

3. with 24 memory indicator . The LED will turns RED when you press the buttons beside.

4. with antenna, more stable.

5. The remote distance is 500M.

6. with 24 buttons and 24 LED. When the cue is fired, the LED will turns RED.

7. with “sequential” button, it is divided into parts, “1-12” and “13-24”

8. Waterproof case

9. It could divide into 100 districts (control 100 pcs 24 channels receivers at max). Please notice the “district” button on the top right corner. When you adjust it to “1”, it will control the first 24 channels of first receiver (district). When you adjust it to “2”, it will run the second receiver (district).

Parameters of receiver

1. Powered by 4.2V internal rechargeable lithium battery (but the output voltage is 12V), less weight and longer life.

2. Each receiver has 24 channels.

3. with “TEST” function. The LED will turns Green when the products are connecting well.

4. Each channel could fire one talon(consumer) igniters and 5 e-matches in series.

5. Programmable and interchangeable. You could use change the channels as you want. And if one receiver has some problem, you could use others instead.

6. It could divide into 100 districts (control 100 pcs 24 channels receivers at max). Please notice the “district” button on the top right corner. When you adjust it to “1”, it will control the first 24 channels of receivers. When you adjust it to “2”, it will run the second 24 channels. You could use the transmitter to control the other districts by the same manner.

7. sequential fire. Please adjust the “district” button to the one that you want to do the sequential fire. And then move the “1-12” and “13-24” buttons. Pressing  “rapid” button , all the channels will do the sequential fire with 0.4 Seconds.  If you need different sequential time, please tell us. We can set it in the factory.

8.Salvo fire. Please adjust the sequential time as "0.0", then press the "rapid" button, it will fire 24 channels at the same time.