Display fireworks firing system

36 cues fireworks firing system both for remote and wire control,Rechargeable, Sequential and fire all function

Remote or wire control way
Power by internal battery
sequential fire
connnecting more receiver
Product description: 36 cues fireworks firing system both for remote and wire control,Rechargeable, Sequential and fire all function, fireworks firing system 36, wire or wireless control way, ematches, talon
INQUIRY

The whole order is including a remote controller, a wire controller , a 36 cues receiver and a power charge.

DC36R-B waterproof firing system has 36 channels in total. Powered by 12V internal rechargeable lithium battery, with both wire control and wireless control functions. This firing system could “salvo fire”,“sequential fire” and “step by step fire.

Operate video in youtube: https://www.youtube.com/watch?v=xDq77K8WbwE

Features

1. Waterproof black case, protect the firing system very well.

2. With sequential(rapid) , salvo and step fire function. You could adjust the sequential(rapid) time by the time table. Time range is 0.1-9.9S.

3. With low battery indicator. The LED will light when it is need to charging.

4. With LONG DISTANCE remote. Remote range is 400-500M

5. With “INPUT” and “OUTPUT” clips. Several machine could connect together.

6. Each channel with a “TEST” LED.

7. 12V battery, could fire talon(consumer) igniters

Instruction of remote

Please look the remote below:

Button“A”is for step fire-- the firing system will fire one by one when you press the “A “button.

Button“B”is for sequential fire

Button“C”is for salvo fire – all the channels will fire together, must keep pressing for more than 1 second

Button“D”is for return.

Notice for charging

1.It needs charging on 110V/220V AC for about 4 hours. And it could keep working for 10 hours.

2.It needs to be charging every two month if you don’t’ use it for a long time.

Charge wire(one head connect the AC power and another with the machine)

Connect and Test:

1). Please turn on the power switch, and move the switch to “test” position, at this moment, if the power indicator lights, and the time table shows “9.9” seconds, it means the machine is in good condition.
2). Connect the fireworks in series to the black/red clips, if the corresponding channels test indicator lights, it means the products are connecting well.
3). After finished the connecting and tested well, you can move the test switch to “fire” position, can fire the products with corresponding functions.

Rapid Fire, Salvo Fire, Step Fire and Online Rapid-Fire

1). Rapid Fire: Press “Time+” and “Time-” button to adjust the rapid fire time, after you set the time, press the remote button “B”, then it can do the rapid fire.

Wire control Rapid fire: Move the button to the “Rapid” position, connect the wire remote to the red/black clip, then press the wire control remote button to start rapid fire. Please note this function can only work when you keep press the remote button, if release the button, the rapid fire will stop.

2). Salvo Fire: Press remote button “C” at 1 second can do the Salvo Fire, that’s 36 channels fire together ( When doing the Salvo fire, each channel can only fire one product)

3). Step Fire: Move the button to “Step” position, press remote button “A” to start Step Fire, the whole channels in the first district will fire one by one; when need to do the next district, press again, the next one the same. (One press can only control one district, fire next district should press again.)

4). Online Rapid-Fire: Set well the Rapid-Fire time, use a 2 conductors wire to connect 2 same machines, one machine from the “output” red/black clips to the another machine’s “input” red/black clips, then press the remote button “B” can start Online Rapid-Fire of these 2 machines.